Chào mừng Bạn tham gia Diễn Đàn VNKienThuc.com - Định hướng Forum Kiến Thức
- HÃY TẠO CHỦ ĐỀ KIẾN THỨC HỮU ÍCH VÀ CÙNG NHAU THẢO LUẬN
Kết nối: VNK X - VNK groups | Nhà Tài Trợ: BhnongFood X - Bhnong groups - Đặt mua Bánh Bhnong

Trả lời chủ đề

Nội dung: <blockquote data-quote="haokhung_group" data-source="post: 51936" data-attributes="member: 53931">This article discusses the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager \Memory Management\SecondLevelDataCacheREG_DWORD Range: Kilobytes 0, 1 -cache size Default: 0 (256K)MORE INFORMATIONImportant This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:322756  How to back up and restore the registry in WindowsSecondLevelDataCache records the size of the processor cache, also known as the secondary or L2 cache. If the value of this entry is 0, the system attempts to retrieve the L2 cache size from the Hardware Abstraction Layer (HAL) for the platform. If it fails, it uses a default L2 cache size of 256 KB. If the value of this entry is not 0, it uses this value as the L2 cache size. This entry is designed as a secondary source of cache size information for computers on which the HAL cannot detect the L2 cache. This is not related to the hardware; it is only useful for computers with direct-mapped L2 caches. Pentium II and later processors do not have direct- mapped L2 caches. SecondLevelDataCache can increase performance by approximately 2 percent in certain cases for older computers with ample memory (more than 64 MB) by scattering physical pages better in the address space so there are not so many L2 cache collisions. Setting SecondLevelDataCache to 256 KB rather than 2 MB (when the computer has a 2 MB L2 cache) would probably have about a 0.4 percent performance penalty.</blockquote>

Tên

Mã xác nhận